Saltar para: Posts [1], Pesquisa e Arquivos [2]
From to
Prepare your base as you normally would
1. Layers > New Adjuestment Layer > Curves
RGB: Input: 100
Output: 170
2. Layers > New Adjustment Layer > Hue/Saturation
Saturation: +25 (Depends on your image. Please increase the saturation responsibly. I don't want you to end up with a grainy image)
3. Layers > New Adjustment Layer > Curves
RGB: Input: 115
Output: 135
And you're done! Other examples:
Have an image you like but isn't really dark enough and it ends up looking really light? There's a simple trick to that. Just duplicate your image and set it to multiply. Then adjust the fill responsibly until you get the outcome you want.
Download do PSD
From to
1) Layers > New Adjustment Layer > Curves
RGB: Input: 100
Output: 135 (Make this value lower if your image turned out too bright)
2) Layers > New Adjustment Layer > Selective Color
Reds: Cyan: -100
Yellow: +100
Black: +20
Yellows: Cyan: +100
Yellow: -70
Cyans: Cyan: +80
Yellow: -80
Neutrals: Cyan: +20
3) Layers > New Adjustment Layer > Curves
Red/Green: Input: 100
Output: 120
Blue: Input: 100
Output: 125
4) Layers > New Adjustment Layer > Hue/Saturation
Saturation: +15 (Depends on your image. Please increase the saturation responsibly. You don't want to end up with a grainy image)
And voila! Just tweak the Curves and the Selective Coloring until you're satisfied with what you've come up with. You can always add a Brightness/Contrast to give it a little bit of sprucing up.
Download do PSD
Other examples with little modifications:
>>
2 – Create a new layer and fill it with this COLOR #E1E2E2 and set it o MULTIPLY 70%
3 – Create a SELECTIVE COLORING LAYER:
REDS: -100 , 0 , +20 , 0
YELLOWS: -100, +20, -100 , 0
MAGENTA: 0 , +100 , 0 , 0
WHITES: 0 , 0 , 0 , -17
4 – Create a COLOR BALANCE layer:
MIDTONES: 0 , 0 , -26
5 – New SELECTIVE COLORING LAYER:
REDS: -35 , 0 , 0 , 0
YELLOWS: 0, 0 , -100 , 0
CYANS: +100 , -10 , -100 , 0
MAGENTA: 0 , +44 , +100 , 0
NEUTRALS: +15 , 0 , +12 , 0
BLACKS: 0 , 0 , 0 , +15
6 – Finally create HUE/SATURATION LAYER:
MASTER: 0 , +15 , 0
YELLOWS: 0, +15 , 0
You’re done. Now you can add textures, text… or whatever you want. Be creative and feel free to made the modifications you want to get the best coloring.
Don’t post this tutorial anywhere else without permision.
OTHER EXAMPLES:
Download do .PSD